Itel S15 W6002 Firmware (Stock Rom) Download and Guide of flashing

Itel S15 W6002 Flash File: The Itel S15 W6002 Flash File is packed in the zip package and The file does not contain any password. The flash file is original. The file name is “W6002-F3108-9.0-OP-V037-20191015” and the flash file size is “1.07GB.

Flash File Support-

Download Itel S15 W6002 Flash File

SPD Upgrade Tool Download: The spd upgrade tool is also known as a research download tool. The SPD flash also comes in the zip package and The SPD flash tool size is “2.48 MB”. The file does not contain any password protection.

SPD Flash Tool-Supported OS-

  • Windows- XP,7,8,10

Disclaimer Note- Itel S15 W6002 Flash File is not hosted or stored in androidfastbootresettool.com. The androidfastbootresettool.com is not responsible and liable for any damages in case of any harm to your mobile phone by using the above providing flash file. it will be used on your own risk. Any problem regarding the flash file please contact the contact us page.

Itel S15 W6002 Flashing With SPD Flash Tool.

In Computer Steps.

  • Download the “SPD flash tool” and “Itel S15 W6002 flash file” from the above links.
  • As I already provided above the SPD flash tool or Itel S15 W6002 flash file was comes in the zip package. Winrar” software is required to extracting these files.
  • After Extracting these files from the “Winrar tool” then open the “Flash Tool” folder and Find in folder  “Researchdownload.exe” application and launch it. 
  • After launching the Research download tool application click to the “Load Packets” button.
  • Now browse window is opened select the packet format file from the Itel S15 W6002 flash file” folder.
  • Now click to the Start button.

In Mobile Steps.

  • Check the battery percentage of the mobile phone and it will be more than 50% and then you are not required to charge the battery and then follow the next step.
  • Then turn off the smartphone.
  • Now press the boot key of the smartphone and then insert the USB data cable from mobile to computer.

In Computer Steps.

  • After then connect the USB cable the flashing process automatically begins.

NoteThe flashing process will be taking estimated 15-20 minutes depending on computer speed and while the flashing process does not disconnect the USB cable because it may cause dead or unbrick the device.

  • The showing green color Passed the message on flash tool its means the flashing process is completed then disconnect the USB data cable.

In Mobile Steps.

  • Press the power button and boot the smartphone.
  • Now the smartphone stucks and take 20 minutes to completely boot.
  • After completely booted the smartphone tap to the arrow button and set the basic setting.

The mobile is successfully flashed from the SPD flash tool”. This process is very easy and safe.

 


Note: All the above provide guide is follow on your own risk androidfastbootresettool.com is not be responsible for any damage to your smartphone and any question about this guide or other contacts on the contact us page.

Add a Comment

Your email address will not be published. Required fields are marked *